April Farm Equipment Wanted

Hyd. lift cylinder that operates blade in front of MC JD 1951 crawler. Bert Phillips, Wadesboro 704-694-8052.

Corn binder must be complete, ready to work in good working condition. M. Mitch, Leicester 828-273-3968.

Litter spreader GC. George Wilson, Raleigh 231-843-4177.

JD 400 rolling cruster, 3 pt hitch. Charles Clifton, Clinton 910-592-7686.

One row corn picker pull type, wagon hay or grain. David Price, Reidsville 336-349-4885.

6 ft bushhog GC, reasonable, near Charlotte. R.F. Thornburg, Indian Trail 704-753-4451.

Belly mower and all hook ups for B1750 Kubota, must be in good working condition. Timothy Donaldson, Monroe 704-753-4668.

’76, ’77, ’78, ’79 Cub tractor in GC, fast hitch. Robert Woodlief, Wake Forest 919-496-8599.

430 or 530 Case tractor running or not. D. Patterson, Snow Camp 336-675-5476.

JD baler that will make 4’ or 5’ bales, GC, reasonable price. Paul Boyd, Oxford 919-693-6252.

T.D. 9 bulldozer or track loader, running or for parts. David Aron, Snow Camp 336-213-5537.   

NH 311 square baler; Chandler or Barron brothers pull type litter spreader. Phillip Church, Boomer 336-921-3195.

Engine for Farmall M tractor also rear tractor tire made by Harvest King, size 12.4-24. William Peoples, Warrenton 252-257-1936.

Pittman Rod pulley for 501 Ford cycle mower. Donald Nesbit, Concord 704-786-6047.

Yazoo 48” & 42” deck parts, older model. Jack Matthews, Charlotte 704-846-1903.

JD M tractor for parts running or not front and rear rims for JD M. James Isley, Julian 336-697-1697.

Old Sioux grain bins made in 60’s and 70’s for parts in GC. Millard Crouse, Alamance 336-214-7696.

JD 1630-1640 harrow in need of repair or useable, set of 38” rear wheel and rims for 4020. Randy Barringer, Rockwell 704-279-7085.

Airens GF 20 lawn and garden tractor, running or in need of repair. George Sparrow, Belhaven 252-945-4632.

Drop seeder box that fits or could be made to fit a 5 ft double roller Brillion cultipacker. James Walker, 910-343-5046.

Manure spreader condition does not matter nor does age but it must work, can need minor repairs, will pay up to $500. Todd Grissom, Salisbury 704-855-2625.

PTO driven fence post driver. Pam Isley, Creedmoor 919-528-0761.

Full hydraulic front end loader to fit a 454 Intern’l tractor, reasonable price and GC; good used grill to fit a 454 Intern’l tractor. Allan Taylor, Lenoir 828-228-1369.

Disc for Farmall Cub. Travis Pickel, Asheboro 336-963-1668.

Cleanout bucket for Ford and NH backhoe, prefer 3 ft or larger. Roger Prince, Tabor City 910-625-5288.

50 hp to 90 hp gas or diesel that needs handyman, any brand, not over 2000, also round baler, $500. William Kroll, Bennett 336-879-6505.

Need stripper bars for JD 850 series side delivery hay rake, will consider a parts rake.  Richard Douthwaite, Matthews 704-821-8549.

T post and utility polls to make round ring fencing for horses. Willie Lewis, Cove City 252-672-1862.

Shaver or similar type hydraulic post driver for tractor; tractors, implements, hay equipment etc. Don Elam, Robbins 919-548-4221.

Front end loader for ’95 MF 383, 2WD. James Clark, Bryson 828-488-6961 or 736-1270.

Square baler. Dan Kerns, McLeansville 336-375-3981.

AC 72 all crop harvester combine, pull type, reasonable condition and reasonable price. Dan Houck, Fuquay-Varina 919-349-5717.

No til tobacco setter. Trevar Johnson, Dobson 336-366-4280.

Pulverizer for 3 pt hitch any size up to 6 ft. Mark Etheridge, Fremont 919-284-5000.

Used grain/seed drill need ground driven type that does not require hydraulics to operate, under 12’, can be fixer upper. Jeff Harless, Locust 704-485-2622.

Diesel power unit with clutch to operate small circular sawmill, must be in good operating condition, will consider gas unit. Richard Hahn, Pinnacle 336-368-8801.

Nice G Allis with or without hyd lift, good tires, VGC with cultivator and lay off plow. Curtis Spainhour, Winston-Salem 336-765-1496.

One row corn head for a New Holland 718 silage chopper. Charles Ferguson, 704-865-1797.

JD 42 combine and JD 14T baler for parts, also 1920’s Fordson equipment of any kind. Karl Hesse, Huntersville 704-895-8241 or 724-1413.

Roller mill or hammer mill suitable for processing about 10 tons feed/year, prefer operational mill, but will consider any condition. Eric Brown, Yadkinville 704-546-5074.

JD 175 hydrostatic mower with oil filter, good deck and good to excellent running condition.  Phil Hart, Sr., Louisburg 919-562-1091.

3 pt hitch aerator plugger, 4 ft or 5 ft wide, prefer bushhog or Woods brand. Larry Simpson, Indian Trail 704-289-1391.

Ford 2N tractor for parts, must have good tires, ’44 or ’45; 4 ft or 6 ft box blade to fit a 3 pt hitch.  Harold Holt, Sanford 919-776-9645.

JD M implements plow and harrow, etc. M. Beepy, 828-688-4162.

4 basket tedder in GC. William Godfrey, Sanford 919-775-2826.

JD L, LA, in FC and prefer running; wheel weights and a front weight for a JD 420S, need a set of mounting brackets that hold the cultivators to the frame of a JD 420S on the sides. Corey Walters, Lumberton 910-258-2099.

3 pt hitch post hole auger, nego.  Keith Garrell, Delco 910-655-9342.

JD 40 or 420 farm tractor to restore, any condition, also parts tractor; JD belly mounted sickle mower that works on M, Mt or 40 JD farm tractors. Anthony Rollins, Ellenboro 828-429-3809.

Hood and grill w/sides for 1990 model Cub Cadet riding lawnmower, series no. 1862, in good working order. John Martin, Lenoir 828-758-2597.

Long peanut combine in working cond., model 393. Kenzy Edgerton, Kenly 919-242-4945.

Hay tedder in GC, must be reasonable. Crissy Anderson, Pleasant Garden 336-676-0303.