Standards Division
Fees - Mass Calibration with Mass Values
Calculated Using NIST Weighing Designs
Fee Schedule (partial) for the North Carolina Standards Laboratory
North Carolina General Statutes, Chapter § 81A-12 Fee schedule
Effective September 1, 2005
The following fees apply to all weights that are calibrated using NIST weighing designs. These weights are tested in groups (typically either a 1, 2, 3, 5 series or a 1, 2, 2, 5 series) and are subject to the minimum per series fee shown. The best uncertainty possible from the North Carolina Standards Laboratory shall be assigned to the mass values of the weights. If necessary and considered feasible by the metrologist, adjustments to ASTM Class 0, 1, 2, or 3 tolerances or IOLM Class E1, E2, F1, or F2 tolerances may be made for an additional fee of two times the normal fee. Adjustments to weights of this group shall require a minimum of 10 days for weights to return to environmental equilibrium before a final calibration value can be assigned.
Weight Range |
Fee |
Unit or Series |
0-1 kg |
$30.00 each |
Minimum charge of $90.00 (3 weights) per series |
2-30 kg |
$50.00 each |
Minimum charge of $150.00 (3 weights) per series |
0-2 lb |
$30.00 each |
Minimum charge of $90.00 (3 weights) per series |
3-50 lb |
$50.00 each |
Minimum charge of $150.00 (3 weights) per series |
Click here to return to the fees schedule page.
Cliff Murray , Interim Standards Laboratory Manager
Phone: 919-733-4411
Fax: 919-733-8804
|